LOG

LOG Displays a log of previous system messages.

This command is used to display a log of previous system messages. The log is saved in non-volatile memory and will automatically roll over when full.

CHECKCLEAR

Clears the Check Condition Log.

CHECKCONDITION|CHECKCONDITION=MORE

Displays the Check Condition Log. ‘MORE’ will display additional information concerning the check condition.

CLEAR

Allows the user to clear the log of all previous messages.

DISKFAILCLEAR

Clears the Disk Fail Log.

DISKFAIL|DISKFAIL=MORE

Displays the Disk Fail Condition Log. ‘MORE’ will display additional information concerning why the disk failed.

FILTER=EMERG|ALERT|CRITICAL|ERROR|WARNING|NOTICE|INFO|DEBUG

Allows the user to filter the display of the MLS log according to what level of message they would like to view. When using the FILTER command the log will show messages at the specified priority level and all of the messages above the specified priority level.

FILTERCPU

Allows the user to filter the display of the MLS log according to what card slot the message came from. When using the FILTERCPU command the log will show messages of the specified slot ID.

LINES=x

Specifies the number of lines that should be displayed from the end of the log specified.